HMFB Series of Electromagnetic flow meters

The HMFB Series of Electromagnetic flow meters are designed for measurement of conductive liquids with virtually no pressure loss. The HMFB Range distinguishes itself from other low-cost electromagnetic flow meters by providing a high end performance typically found in premium flowmeters with a price point usually only found in less capable flowmeters.

Measurement is independent of pressure, temperature, density and viscosity. With no moving parts, maintenance costs are exceptionally low while wide turndown capability means performance level is very high.

Mag Flow Meters can be used in nearly all types of industry for the measurement of liquids, pulp, paste, emulsions and slurries provided they have at least a minimal conductivity. HMFB Mag Flow Meters are specifically designed for accurate and reliable flow measurement in any application. Meter liners are durable and will withstand abrasive flows and resist build up of solids often found in waste water. Line sizes are available from ½” to greater than 80”.

Model HMFB Mag Flow Meters can meet your application requirements accurately and reliably with low cost.

Electromagnetic Flowmeter Specifications

Available Sizes	US: ANSI 1/2”…56” (Sizes over 56” are available to AWWA C207)
Accuracy	Standard: ±0.5% (0.6m/sec to 15 m/sec) Optional: ±0.2% (1.0m/sec to 15 m/sec)
Measurement Range	Up to: 1,727,305 gal/min
Maximum Flow Velocity	15m/sec
Measurement Resolution	±1mm/sec
Turndown	Up to 1500:1
Process Connections	ANSI Flange (B16.5) Wafer Design
Lining Materials	Neoprene PTFE Polyurethane PFA Tefzel (PFA and Tefzel lining available with wire net reinforcement for negative pressure applications)
Electrode Materials	316L Stainless Steel Hastelloy-C22 Hastelloy-B10 Titanium Tantalum Platinum/iridium Alloy Tungsten Carbide Coated 316L Stainless Steel
Removable Electrode	In-situ Electrode Maintenance and Replacement Option Available
Housing Protection Class	IP65 IP67 (Compact versions only) IP68 (Remote Versions Only)
Remote Transmitter	Pipe Mount or Wall Mount
Available Power Supplies	85…265VAC 16…36VDC
Transmitter Configuration Options	Front Panel Keypad Hand Held Infrared Programmer
Output Signals	1 x Active Current Output 1 x Passive Current Output 1 x Frequency / Pulse Output
Status Outputs	2 x Contact / Status Outputs for Upper and Lower Flow Limit
Digital Communication	RS485 Modbus, HART