HMFI Insertion Electromagnetic Flow Meter

The HMFI insertion electromagnetic flow meter range is a cost effective and convenient solution designed to measure the volumetric flow of conductive liquids and slurries within closed pipelines.  It can be used for applications in many industries, including water & wastewater, chemical, petroleum, power, pharmaceutical, food & beverage, pulp & paper, etc.  The HMFI insertion electromagnetic flowmeter is the ideal instrument for measuring:

• Aqueous chemical fluids
• Viscous fluids and slurries
• Water & wastewater flows

HMFI insertion mag meters are not affected by changes in line pressure, temperature, density and viscosity.  Small amounts of solids and entrained gas in the flow stream will be measured as part of the overall flow.

Insertion probes are available for installation in pipelines from 6in to 120in.  Typical applications are leak detection and pipe network analysis.  Insertion mag meters are ideal for applications where there are cost constraints or space is limited.  Probes can be installed in existing ports in pipelines, providing real cost savings over other in-line meter types.

HMFI insertion electromagnetic flow meter specification

Available Sizes	Four probe lengths to suit line sizes from 6”…120”
Accuracy	± 1.5 % of measured value plus ± 0.5 % of maximum range
Maximum Flow Velocity	5 m/s / 16.4 ft/s
Maximum Pressure	16 Bar / 232 psi
Maximum Temperature	Compact Unit                 80°C / 176°F Remote Unit                   100°C / 212°F
Repeatability	± 1.5 % of rate
Process Connections	ANSI Flange (B16.5)
Electrode and Probe Body Materials	316L Stainless Steel Hastelloy-C22 Hastelloy-B10
Removable Probe	Hot Tap Retractor Option Available
Housing Protection Class	IP65 IP67 (Compact versions only) IP68 (Remote Versions Only)
Remote Transmitter	Pipe Mount or Wall Mount
Available Power Supplies	85…265VAC 16…36VDC
Transmitter Configuration Options	Front Panel Keypad Hand Held Infrared Programmer
Output Signals	1 x Active Current Output 1 x Passive Current Output 1 x Frequency / Pulse Output
Status Outputs	2 x Contact / Status Outputs for Upper and Lower Flow Limit
Digital Communication	RS485 Modbus, HART