EXstatic Sensor and Electrode Installation Adaptors

EXstatic 310
EXstatic 310

EXstatic 310 – Ingold DN25 Mount

Static sensor housing for installation of Ø12mm x 120mm sensors and electrodes through standard straight or 15° angled Ingold style DN25 (G 1¼“ thread) sockets on tanks and pipes

  • Accommodates all sensors Ø12 x 120mm with PG13.5 thread
  • Max. pressure 10 bar / 145 psi
  • Max. temperature 140°C / 285°F
  • Surface finish options of Ra<0.78μm / 30μinch or Ra<0.37μm / 15μinch
  • Process seal options of EPDM (FDA / USP VI) or FPM (Viton™)
  • With or without probe tip protection cage

EXstatic 311 – Triclamp Mount

Static sensor housing for installation of Ø12mm x 120mm sensors and electrodes through standard 1/1½” and 2” Triclamp flanges on tanks and pipes

  • Accommodates all sensors Ø12 x 120mm with PG13.5 thread
  • Max. pressure 10 bar / 145 psi
  • Max. temperature 140°C / 285°F
  • Surface finish options of Ra<0.78μm / 30μinch or Ra<0.37μm / 15μinch
  • Process seal options of EPDM (FDA / USP VI) or FPM (Viton™)
  • With or without probe tip protection cage
  • Choice of immersion lengths below flange
EXstatic 311
EXstatic 311
EXstatic 312
EXstatic 312

EXstatic 312 – Varivent / NEUMO Mount

Static sensor housing for installation of Ø12mm x 120mm sensors and electrodes through Varivent N DN40-125 or NEUMO BioControl D50 flanges on tanks and pipes

  • Accommodates all sensors Ø12 x 120mm with PG13.5 thread
  • Max. pressure 10 bar / 145 psi
  • Max. temperature 140°C / 285°F
  • Surface finish options of Ra<0.78μm / 30μinch or Ra<0.37μm / 15μinch
  • Process seal options of EPDM (FDA / USP VI) or FPM (Viton™)
  • With or without probe tip protection cage

EXstatic 315 – 15° Angled Adapters

Static sensor housing for angled installation of Ø12mm x 120mm liquid filled sensors and electrodes through Varivent N DN40-125, 1/1½” and 2” Triclamp or NEUMO BioControl D50 flanges on tanks and pipes

  • Accommodates all sensors Ø12 x 120mm with PG13.5 thread
  • 15° sensor/electrode insertion angle
  • Max. pressure 10 bar / 145 psi
  • Max. temperature 140°C / 285°F
  • Surface finish options of Ra<0.78μm / 30μinch or Ra<0.37μm / 15μinch
  • Process seal options of EPDM (FDA / USP VI) or FPM (Viton™)
EXstatic 315
EXstatic 315
EXstatic 340
EXstatic 340

EXstatic 340 – ¾” / 1” NPT Adapter

Static sensor adapter housing for installation of Ø12mm x 120mm sensors and electrodes in place of ¾” and 1” NPT bodied sensors and electrodes in tanks and pipes

  • Accommodates all sensors Ø12 x 120mm with PG13.5 thread
  • Max. pressure 10 bar / 145 psi
  • Max. temperature 140°C / 285°F
  • Available in 316L stainless steel, polypropylene (PP) and PVDF
  • Process seal options of EPDM, FPM (Viton™) or FFKM (Kalrez™)
  • With or without probe tip protection cage

EXstatic Technical Data Sheet

Need more information? Download detailed technical data sheet here

Didn’t find what you were looking for?

Contact us for assistance: