Advanced Diagnostics

Lowest Cost of Operation

Advanced Feature Set for Enhanced Data Collection

Applications

Bran + Luebbe analyzers are field proven in a great many applications. With versatile method setup and automation, samples can be mixed with formulated for-the-purpose reagents to provide reliable, accurate and consistent results year after year.

The table on this page lists some typical applications and the measurement type(s) utilized. Measurement ranges vary from trace materials to percentage measurements. If you can’t find what you are looking for, let us know – we may have a solution for you!

Waste Water

  • WasteWaterDischarge to Rivers & Water Courses
  • Demonstrate discharge limit compliance
  • COD / BOD
  • Toxic materials
  • NO3, PO4, NH4 levels
  • Consent parameter monitoring

Waste water streams contain a wide variety of materials that must be controlled and removed before treated water is discharged to the environment. Even small amounts of toxic substances can create havoc in the waste water treatment process. B&L filtration systems can provide clean samples to an analyzer from streams with heavy suspended solids and give you the measurements you need to fully control and operate your plant. Once the process is complete, let B&L analyzers give you the piece of mind that discharge is within limits and safe.

Power Plants

  • Power PlantsMaintain boiler feed water at optimum levels
  • Silicates, PO4, Fe, Sodium, Chlorides
  • Prevent scaling
  • Improve efficiency
  • pH
  • Total Hardness
  • Discharge water

Poor water quality to boilers contributes to one of the largest maintenance costs in power plants. The prevention of scaling is one of the most important actions to be taken in day to day operations for a power plant to run at peak performance. Proper attention to scale build-up can save literally millions of dollars for power plant owners and operators

With increased scrutiny on environmental pollution, it’s important to monitor plant discharge. Bran + Luebbe provide a battery of analyzers to ensure discharge remains in compliance – good for the plant and good for the environment!

Drinking Water

  • Drinking WaterEnsure quality and disinfection levels
  • Meet compliance requirements
  • Measure metals levels – Al, Fe, Mn
  • Nitrates
  • Monitor chlorination levels
  • Hardness levels
  • APHA/Hazen/PtCo Color

Clean drinking water is a priority for the world. In the developed world, we take for granted the availability of clean potable water for our everyday use. What we don’t see behind the scenes is the effort that goes into ensuring our water supplies are safe and uninterrupted. Bran + Luebbe online analyzers can help ensure water delivered to distribution networks meets the highest possible standards.

Oil & Gas

  • Oil & GasProduced water – many different substances can be measured before discharge
  • Injection water
  • Steam plant

Produced water is an ever=present part of oil recovery and production. Separated from the raw crude oil, produced water can contain a wide variety of substances, some benign and some not so friendly. Before discharge back to the environment, produced water must be thoroughly cleaned and all traces of these substances removed. The installation of Bran + Luebbe Analyzers can help monitor outflows to ensure compliance to discharge limits is met and prevent costly fines and clean up when problems do occur.

Some Of The Many Measurements Possible With Bran+Luebbe Analyzers

Application For:FormulaMethod/Instrument Type
Acid Capacity (Mz, Pz ValueKs4.3, Ks8.2
Titrometer
AluminiumAl3+Kolorimeter
AmmoniumNH4+
Kolorimeter / Ionometer / Combination
Ammonium + NitrateNO3-+NH4-+
Combination
APHA Color in WaterAPHA
Kolorimeter
Boric acid
H3BO3
Kolorimeter
Boron
B
Kolorimeter
Calcium in water
Ca2+
Kolorimeter
Carbon dioxide - free or total
CO2
Ionometer
Carbonate hardnessKs4.3, Ks8.2
Titrometer
Chloride
Cl-
Ionometer / Kolorimeter
Chlorine
Cl2
Titrometer / Kolorimeter
ChromiumCrKolorimeter
Citric acid
C6H8O7
Titrometer
Copper
Cu2+
Kolorimeter
Cyanide
CN-
Kolorimeter / Titrometer
Dissolved organic carbonsDOC
Ionometer
Fluoride
F-
Ionometer
Formaldehyde
CH2O
Kolorimeter
Hardness
Ca2++Mg2+
Titrometer
Hardness - carbonate
Ks4.3, Ks8.2
Titrometer
Hazen Color in Water
Hazen
Kolorimeter
Hydrazine
N2H4
Kolorimeter
Hydrogen peroxide in waterH2O2
Titrometer
Iron
Fe
Kolorimeter
Lead in water
Pb
Kolorimeter
Manganese
Mn
Kolorimeter
Molybdenum
Mo
Kolorimeter
Nickel
Ni
Kolorimeter
Nitrate
NO3--
Kolorimeter / Ionometer
Nitrate + Ammonium
NO3-+NH4-+
Combination
Nitric acid
HNO3
Titrometer
Nitrite
NO2
Kolorimeter / Combination
Nitrogen - total
TN
Kolorimeter
Ozone in water
O3
Kolorimeter
Peracetic acid
C2H4O3
Titrometer
Phenol
C6H5OH
Kolorimeter
Phosphorous in water
P
Kolorimeter
Potassium
K+
Ionometer
PtCo Color in Water
PtCo
Kolorimeter
Silica
SiO2
Silikometer / Combination
Soda lye
NaOH
Titrometer
Sodium
Na
Natriometer / Combination
Sulfide
S2-
Kolorimeter / Titrometer
Sulfite
SO2
Titrometer
Sulfuric acid
H2SO4
Titrometer
Total nitrogen
TN
Kolorimeter
Urea
(H2N)-CO
Kolorimeter
Zinc
Zn
Kolorimeter / Titrometer

Don’t see what you want? Contact us below and we’ll see what is possible.

Have an Application?

Let Bran+Luebbe give you an unattended water quality analysis solution – download an application data sheet, fill in your process specifications and send it to us. We’ll come back to you with a configuration that will suit your needs.

Need Support?

Need help, a manual or additional information on your Bran+Luebbe Analyzer?